Lantronix SLC8 User Manual

7: Services
SLC™ Console Manager User Guide 80
Figure 7-6 Services > Secure Lantronix Network > Search Options
2. Enter the following:
3. If you entered an IP address, click the Add IP Address button. The IP address displays in the
IP Address List.
4. Repeat steps 2 and 3 for each IP address you want to add.
5. To delete an IP address from the IP Address List, select the address and click the Delete IP
Address button.
6. Click the Apply button. When the confirmation message displays, click Secure Lantronix
Network on the main menu. The Services > Secure Lantronix Network page displays the
Secure Lantronix devices resulting from the search. You can now manage these devices.
Secure Lantronix Network Commands
The following commands for the command line interface correspond to the web page entries
described above.
To detect and view all SLC console manager or user-defined IP addresses on the local
network:
set slcnetwork <one or more parameters>
Parameters:
add <IP Address>
delete <IP Address>
search <localsubnet|ipaddrlist|both>
Secure Lantronix
Network Search
Select the type of search you want to conduct.
 Local Subnet performs a broadcast to detect Secure Lantronix devices on the
local subnet.
 Manually Entered IP Address List provides a list of IP addresses that may not
respond to a broadcast because of how the network is configured.
 Both is the default selection.
IP Address If you selected Manually Entered IP Address List or Both, enter the IP address of
the Secure Lantronix device you want to find and manage.

Lantronix SLC8 Specifications

General

Brand	Lantronix
Model	SLC8
Category	Server
Language	English