SLC™ Console Manager User Guide 216
13: Maintenance
The system administrator performs maintenance activities and operates the SLC using the options
for the Maintenance tab and additional commands on the command line interface.
SLC Maintenance
The Maintenance > Firmware & Config page allows the system administrator to:
Configure the FTP, SFTP, or TFTP server that will be used to provide firmware updates and
save/restore configurations. (TFTP is only used for firmware updates.)
Set up the location or method that will be used to save or restore configurations (default, FTP,
SFTP, NFS, CIFS, PC card, or USB). Update the version of the firmware running on the SLC
console manager .
Save a snapshot of all settings on the SLC unit (save a configuration).
Restore the configuration, either to a previously saved configuration, or to the factory defaults.
View and terminate current web sessions.
View the firmware version on each boot bank, select the bank to boot from, and copy the
contents of one boot bank to the other.
To configure settings:
1. Click the Maintenance tab. The Maintenance > Firmware & Config page displays.
To Next Page
Loading...
Need help?
General