1: About This Guide
SLC™ Console Manager User Guide 20
Chapter 10: USB Port Provides instructions for configuring USB storage devices (thumb drive) or
USB modems.
Chapter 11: Connections Provides instructions for configuring connections and viewing, updating, or
disconnecting a connection.
Chapter 12: User
Authentication
Provides instructions for enabling or disabling methods that authenticate
users who attempt to log in via SSH, Telnet, or the console port. Provides
instructions for creating custom menus.
Chapter 13: Maintenance Provides instructions for upgrading firmware, viewing system logs and
diagnostics, generating reports, and defining events. Includes information
about web pages and commands used to shut down and reboot the SLC
console manager.
Chapter 14: Application
Examples
Shows how to set up and use the SLC device in three different
configurations.
Chapter 15: Command
Reference
Lists and describes all of the commands available on the SLC command
line interface
Appendix A: Bootloader Lists and describes the commands available for the bootloader command
line interface.
Appendix B: Security
Considerations
Provides tips for enhancing SLC security.
Appendix C: Safety
Information
Lists safety precautions for using the SLC console manager.
Appendix D:
Sicherheitshinweise
Lists safety precautions for using the SLC device in German.
Appendix E: Adapters and
Pinouts
Includes adapter pinout diagrams.
Appendix F: Protocol
Glossary
Lists the protocols supported by the SLC console manager with brief
descriptions.
Appendix G: Compliance
Information
Provides information about the SLC compliance with industry standards.
Appendix H: DC Connector
Instructions
Provides -48VDC plug connector instructions for the SLC console
manager.
Appendix I: LDAP Schemas Provides information about configuring LDAP schemas in Windows active
directory.
Table 1-1Chapter/Appendix and Summary (continued)
Chapter/Appendix Summary
To Next Page
Loading...
Need help?
General