13: Maintenance
SLC™ Console Manager User Guide 233
The default is 1.
To display all network traffic, applying optional filters:
Note: This command is not available on the web interface.
diag nettrace <one or more parameters>
Parameters:
ethport <1|2>
host <IP Address or Name>
numpackets <Number of Packets>
protocol <tcp|udp|icmp>
verbose <enable|disable>
To display information on the internal memory, storage and processes of the SLC unit:
diag internals [email <Email Address>]
Note: This command is available the web interface as SLC Internals under
Maintenance > Diagnostics.
To Next Page
Loading...
Need help?
General