15: Command Reference
SLC™ Console Manager User Guide 273
usbmaxfiles <Max # of Files>
usbmaxsize <Size in Bytes>
usbport <U1>
usesites <enable|disable>
viewportlog <enable|disable>
webcolumns <Web SSH/Telnet Cols>
webrows <Web SSH/Telnet Rows>
Note: A group of device ports can be configured by specifying a comma-separated list of
ports (i.e., '1-4,8,10-12') or 'ALL'. Remove breakseq for Device Ports connected to raw
binary connections. The logging level for the Device Ports log must be set to 'Info' to view
Syslog entries for Device Port logging. To send commands to devices such as SLP power
manager and Sensorsoft, see the help for 'set command'.
The following list includes options which accept the CLEAR command:
Note: CLEAR must be in all caps.
Description
Configures a single port or a group of ports.
set deviceport global
Syntax
set deviceport global <one or more parameters>
Parameters
sshport <TCP Port>
telnetport <TCP Port>
tcpport <TCP Port>
Description
Configures settings for all or a group of device ports.
show deviceport global
Syntax
show deviceport global
Description
Displays global settings for device ports.
set deviceports dialinlist, nfsdir, nfsdir, breakseq, banner, group,
portlogseq, chaphost, chapsecret, dodchaphost,
dodchapsecret, initscript, dialoutlogin,
dialoutpassword, dialbacknumber, emailsubj,
emailstring, emailto
To Next Page
Loading...
Need help?
General