Lantronix SLC8

15: Command Reference
SLC™ Console Manager User Guide 276
protocol <tcp|udp|icmp>
verbose <low | medium | high | disable>
Description
Displays all network traffic, applying optional filters. This command is not available on the web
page.
diag ping | ping6
Syntax
diag ping | ping6 <IP Address or Name> [<parameters>]
Parameters
count <Number Of Times To Ping>
packetsize <Size In Bytes>
ethport <1|2>
Defaults
count:5
packetsize:64
Description
Verifies if the SLC console manager can reach a host over the network.
diag perfstat
Syntax
diag perfstat [ethport <1|2>] [deviceport <Device Port # or Name>]
Note: You must specify an Ethernet Port or Device Port.
Description
Displays performance statistics for an Ethernet Port or Device Port, averaged over the last 5
seconds.
diag sendpacket host
Syntax
diag sendpacket host <IP Address or Name> port <TCP or UDP Port Number>
[string <Packet String>] [protocol <tcp | udp>] [count <Number of
Packets>]
Defaults
protocol:tcp
count:1
Description
Generate and send Ethernet packets.
diag traceroute
Syntax
diag traceroute <IP Address or Name>