15: Command Reference
SLC™ Console Manager User Guide 295
dodauth <pap|chap>
dodchaphost <CHAP Host or User Name>
dodchapsecret <CHAP Secret or User Password>
flowcontrol <none|xon/xoff|rts/cts>
gsmautodns <enable|disable>
gsmbearerservice <GSM Bearer Service>
gsmcompression <enable|disable>
gsmcontext <GPRS Context Id>
gsmdialoutmode <gprs|gsm>
gsmpin <GSM/GPRS PIN Number>
initscript <Modem Initialization Script>
isdnchannel <1|2>
isdnnumber <Phone Number>
localipaddr <negotiate|IP Address>
modemmode <text|ppp>
modemstate <disable | dialin | dialout | dialback | cbcpserver |
cbcpclient | dialondemand |
dialin+ondemand | dialback+ondemand
| dialinhostlist>
modemtimeout <disable|1-9999 sec>
nat <enable|disable>
parity <none|odd|even>
remoteipaddr <negotiate|IP Address>
restartdelay <PPP Restart Delay>
service <none|telnet|ssh|tcp>
sshauth <enable|disable>
sshport <TCP Port>
stopbits <1|2>
tcpauth <enable|disable>
tcpport <TCP Port>
telnetauth <enable|disable>
telnetport <TCP Port>
timeoutlogins <disable|1-30 minutes>
Note: Dial-out GPRS connections may replace the default route and DNS entries.
Static routes (see set routing) may be required to maintain access to subnets that are
not directly attached to the SLC console manager. It is recommended that the initscript be
prepended with AT and include E1 V1 x4 Q0 so that the SLC device may properly control
the modem.
The following list includes options which accept the CLEAR command:
To Next Page
Loading...
Need help?
General