LEGRAND 3440 - Page 341

332
ART. 3559
HC4695
HS4695
L4695
N4695
NT4695
AM5875HD4695
TiThermo Basic software
TiThermo Basic is the tool used for creating or changing, through a simple and logic
graphic interface, the conguration to be sent to the temperature control system central
unit, dening and customising the parameters of the temperature control system and
the proles of the various operating programs.
Thanks to a dedicated function, the software may also be used to update the central
unit rmware.
The software can be used to:
- customize the zones
- manage the actuators, selecting the type of function to be assigned (heating, cooling,
heating+cooling, no function) and the type of load for the selected function (ON/OFF,
Open/ Close, Fan-Coil, Gateway)
- manage the circulation pumps, selecting the type of function to be assigned (heating,
cooling, heating+cooling, no function) and the tripping delays
- customise the conguration parameters and the operating programs of the central
unit (e.g. weekly programs, holiday programs)
- export and/or import proles and collections (as XML les).
NOTE: for more information on the operation of the application see the manual supplied
with the products.
The central unit is connected to the PC using cable item 335919 or with item 3559
(see gure). This accessory is not included with the central unit, and must therefore be
purchased separately.
item 3559
TiThermo Basic screenshots
4-zone central unit
MQ00178-c-EN 29/04/2014