142
A1
PL1
PL2
A3
PL3
M
A2
1
2
3
5
4
067554 H4652/3
AM5832/3 L4652/3
1. Top buttons
2. Bottom buttons
3. LED
4. Configurator socket (note that this must only be used in My Home systems with the
physical configuration)
5. BUS
Legend
Description
Three module flush mounted control, with six pushbuttons and LEDs, which signal the
status of the control.
Technical data
Power supply via SCS BUS: 27 Vdc
Operating power supply with SCS BUS: 18 – 27 Vdc
Current draw: 9 mA
Dimensions
Size: 3 flush-mounted modules
The device can be configured in two ways:
- PHYSICAL CONFIGURATION, inserting the configurators in position.
- Configuration via MYHOME_Suite software package, downloadable from
www.homesystems-legrandgroup.com; this mode has the advantage of offering many
more options than the physical configuration.
For a list of the procedures and their meanings, please refer to the instructions in
this sheet and to the "Function Descriptions" help section in the
MYHOME_Suite software package.
Conguring My Home
Basic control for
3 independent loads
MQ00290-c-EN 01/08/2013
List of Functions
The device performs the following functions:
1. LIGHT SWITCH
2. AUTOMATION CONTROL
3. PROGRAMMED SCENARIO ACTIVATION
6. PLUS PROGRAMMED SCENARIO ACTIVATION
See the following pages for the configuration procedures.
To Next Page
Loading...
