271
4 5 6
1 2 3
7 8 9 C OK
0 P
4
2
5
6
3
1
HC4608
HD4608
L4608
HS4608
N4608
NT4608
5739 46 (White)
5739 47 (Magnesium)067507
Description
Using the transponder key, or a secret code set on the central unit, this device with
display and digital keypad can be used to arm/disarm the system and separate the zones
with the same exibility and using the same procedure as for burglar-alarm central unit
with display, or three module ush mounted central units.
In this way the central units can be installed in an appropriate equipment room, out of
sight.
All system status details are shown of the large backlit display.
Related articles:
681 82 (White Cover)
684 82 (Titanium Cover)
801 24 (Flush-mounting box)
Legend
1 - Graphic display: displays the messages which guide the programming operations
and the events which have occurred.
2 - Transponder reader: receives the burglar-alarm system switching on and o
commands directly from the transponder keys.
3 - Alphanumeric keypad: allows the manual switching on of all those programming
operations which require the use of numbers and/or symbols.
4 - C key: exit the current menu and the programming.
5 - OK key: to conrm the programming operations.
6 - Navigation keypad: navigate the menu.
Technical data
- Power supply from SCS BUS: 27 Vdc
- Max. absorption: 28 mA
- Operating temperature: 5 – 40°C
Dimensional data
Size: 3+3 modules
Front view
Display keypad
MQ00025-c-EN 28/10/2013
To Next Page
Loading...
