169
1
2
3
5
6
4
45 mm
45 mm
51 mm
574046
574096
067225
AM5659
L/N/NT4659N
HD/HC/HS4659
Front view
This devices features a PIR movement detector and a brightness sensor for automatic
activation of various types of loads following the detection of a movement and a
brightness level lower than the set level.
IT is possible to configure several operating modes; for the detailed descriptions see
page 4.
Description
Legend
1. PIR sensor
2. LEARN LED
3. LEARN button
4. Brightness sensor
5. Movement sensor (under the lens)
6. Two-way IR transmitter (under the lens)
Voltage: 27 V=
Maximum current draw: 15 mA
Connection between sensor and actuator: SCS BUS connector
Sensor type: PIR movement detector with 180° detec-
tion angle and brightness sensor.
Flush mounted box depth: 40 mm
Weight: 60 g
Impact resistance: IK04
Penetration of solids and liquids: IP20
Time delay: from 5 sec to 59min. 59 sec
Brightness: from 20 lux to 1275 lux
Operating temperature: from -5°C to +45°C
Storage temperature: from -20 °C to +70 °C
Technical data
Dimensional data
Size: 2 flush mounted modules
PIR ush-mounted SCS Green Switch
MQ00474-e-EN 09/06/2014
Directive:
– Electromagnetic Compatibility Directive 2004/108/EC
Installation regulations:
– CEI 64-8
Product regulations:
– IEC 60669-2-1
– EN 50428
Environmental regulations:
– EU Directive 2002/96/EC: WEEE (Waste Electrical and Electronic Equipment)
– EU Directive 2002/95/EC: RoHS (Restriction of Hazardous Substances)
Standards, Certifications, Marks
To Next Page
Loading...
