LEGRAND 3440 - Page 504

495
BUS 2 1
SCS
AUDIO
OUT
ETH
ONOFF
2 3
4
5 6
1
DC - In
0672 67
0672 68
MH4892
MH4893
Switch
must be configured using the software.
In order to receive/transfer the configuration performed, or to update the firmware, connect the device to the PC using one of the following solutions:
- USB-miniUSB cable;
- Ethernet cable.
Configuration
USB connection Ethernet connection
For the configuration download the software from the website www.homesystems-legrandgroup.com
MQ00758-b-EN 17/12/2013