LELY ASTRONAUT A3 - Page 133

Index 14-1
D-H001.0609EN
14. INDEX
A
Adjust the ACID
HYPO ratio • 9-5
Adjust the Home Position • 9-3
Adjust the Milk Separation Settings for
Calving Cows • 9-6
Adjust the Milk Separation Settings for Sick
Cows • 9-6
Adjust the Quantity of Pre-treatments • 9-5
Adjust the service positions • 9-3
Adjust the Service-1 Position • 9-3
Adjust the Service-2 Position • 9-3
Adjust the Service-3 Position • 9-4
Alarm Duty Counter • 4-18
Alarm Handling • 4-9, 6-13
Alarm History • 4-19
Alarm Resets • 4-15
Alarm System • 4-14
Alarm System Menu Path • 4-18
Alarms and Phone Calls • 10-2
Arm Assembly • 1-2
Attach the Milk Cups again • 6-19
Audible and Visible Alarm Function • 4-15
B
Blow the Milkline Empty (CRS+) • 6-17
Box • 1-1
Brushes Are Dirty After Cleaning • 10-1
C
Calibrate the Robot Arm • 6-1, 6-2
Cancel rinse • 6-16
Change Sample Rack • 6-11
Chemical Hazards (Swallowing/Burning) • 2-4
Clean the Bleed Holes • 7-1, 7-3, 10-1
Clean the Outside of the Teat Cups • 7-1, 7-4
Clean the Robot Arm and the Box • 7-1, 7-5
Clean the sTDS Screen • 7-1, 7-6
Clean the Vacuum Pump • 7-2, 7-8
Clean the X-link Touch Screen • 7-1, 7-7
Cleaning System • 4-12, 6-14
Clear Active Alarms • 6-13
Compressor • 1-3
Compressor Unit • 3-1
Confirmation of alarms • 4-15
Consumable Materials • 12-2
CORRECTIVE MAINTENANCE • 8-1
CRS+ • 4-4, 6-17
CRS+ Keypad • 4-4
CRS+ Menu • 4-5
D
Date and Time Tab • 4-10
Description • 4-3
DESCRIPTION AND OPERATION • 4-1
DIAGRAMS • 11-1
Dimensions and Weight • 3-1
Display Active Alarms • 4-18
E
Electrical Safety • 2-2
Electrocution Hazard • 2-4
Emergency Stop Buttons • 2-8
Empty the M4Use buckets • 6-7
Empty the milk tank • 6-8
Examine the Air Compressor and the Air Dryer
• 7-2, 7-11
Examine the alarms • 7-1, 7-12
Examine the Attention List • 7-1, 7-18
Examine the Cleaning Brushes • 7-1, 7-13
Examine the Quantity of Astri®-CID • 7-1, 7-19
Examine the Quantity of Astri®-L • 7-1, 7-19
Examine the Quantity of Astri®-LIN • 7-1, 7-19
Examine the Quantity of Astri®-UC • 7-1, 7-19
Examine the Teat Cup Liners • 7-2, 7-21
Examine the Twin Tubes • 7-1, 7-16
Examine the vacuum pump oil level • 7-2, 7-22
Extra feed • 6-6
F
Feed funnel • 7-2, 7-14
Filters • 4-14
First Milking • 6-18
G
General Safety • 2-2
I
Indications Tab • 4-9
INSTALLATION • 5-1
Installation of Safety Decals • 2-8
Installation Safety • 2-2
Interrupt a Visit • 6-19
Interrupt Post Treatment • 6-20
Interupt Pre-Treatment • 6-19