LELY ASTRONAUT A3 - Page 134

14-2 Index
D-H001.0609EN
Introduction • 2-1, 4-1
INTRODUCTION • 1-1
L
Laser Light Hazard • 2-5
Lely wash • 4-12
LH Length Dimensions (Imp) • 11-2
LH Length Dimensions (Metric) • 11-1
LH Width Dimensions (Imp) • 11-3
LH Width Dimensions (Metric) • 11-2
LIST OF INCLUDED AMENDMENTS • V
M
Machine Room • 1-2
Main Cleaning • 4-14
Maintenance of Safety Decals • 2-8
Maintenance Safety • 2-3
Measure the Concentration of Astri®-L • 7-2,
7-24
Measure the Temperature of the Hot Cleaning
Water • 7-2, 7-23
Milking • 6-18
Milking Robot • 1-1, 3-1, 4-3, 11-1
Milkline Rinsing • 4-13
Mothership • 1-2
N
Navigation in the X-Link Menu • 4-7
No Admittance for Unauthorized Persons • 2-6
O
Office • 1-3
OPERATING INSTRUCTIONS • 6-1
Operating Safety • 2-3
Operation Area • 3-1
Operator Interfaces • 4-3
Output • 3-1
P
Personal Computer with the Time for Cows
Software • 4-11
Pinching Hazard • 2-6
Pop-up Windows • 4-7
PREFACE • VII
Preparation • 6-9
Preparation Main Cleaning • 4-13
Pressure Limit • 2-7
PREVENTIVE MAINTENANCE • 7-1
Preventive Maintenance Schedule • 7-1
Process Tab • 4-8
Prolong milking • 6-20
Put the Milking Robot In Operation • 6-4, 7-3,
7-4, 7-5, 7-6, 7-10, 7-13, 7-14, 7-16, 7-21,
7-29, 8-1, 8-3, 8-5, 9-1
Q
Quick-Launch Buttons Tab • 4-10
R
Replace a Twin Tube • 7-16, 8-2, 8-5
Replace the Cleaning Brushes • 7-13, 8-1
Replace the Filter Element of the Single Filter
• 7-1, 7-25
Replace the Filter Element of the Twin Filter •
7-1, 7-27
Replace the Teat Cup Liners • 7-2, 7-21, 7-28
Request a Main Cleaning with Astri®-CID by
X-link • 6-15
RH Length Dimensions (Imp) • 11-4
RH Length Dimensions (Metric) • 11-3
RH Width Dimensions (Imp) • 11-5
RH Width Dimensions (Metric) • 11-4
Rinse the Milkline (X-link) • 6-15
Robot Arm Assembly • 1-2
S
SAFETY • 2-1
Safety Decal Messages • 2-3
Safety Decals • 2-3
Safety Instructions • 2-1
Sampling • 6-9
Settings Tab • 4-9
Short Rinsing • 4-12
Shorten a Twin Tube • 7-16, 8-5
Signal Words • 2-1
Spare Parts • 12-3
SPARE PARTS • 12-1
SPECIFICATIONS • 3-1
Start a Lelywash (X-link) • 6-16
Start a Short Rinse (X-link) • 6-15, 7-3, 7-4,
7-5, 7-13, 7-16, 7-21, 7-29, 8-1, 8-3, 8-5
Start an sTDS Cleaning (X-link) • 6-16
Start Astri®-CID Main Cleaning (CRS+) • 6-17
Start Astri®-LIN Main Cleaning (CRS+) • 6-17
Start Astri®-LIN Main Cleaning (X-link) • 6-14
Start Automatic Main Cleaning (CRS+) • 6-17
Start Main Cleaning with X-link • 6-14
Start Rinsing the Milkline • 6-17
Start the Milking Robot • 6-3, 9-1
Start the System • 6-1
sTDS Cleaning • 4-12
Stop Sampling • 6-11