5.2308.8512.0 B
SAFETY 2-5
2
Pinching hazard decal (except Canada
and USA)
Pinching hazard decal (Canada and
USA)
Danger: Pinching hazard
Danger of being pinched by moving parts. Keep
away from all moving parts during operation of the
concentrate feeder.
3
Electrocution hazard decal (except
Canada and USA)
Electrocution hazard decal (Canada
and USA)
Danger: Electrocution hazard
Switch off the electrical power supply with the main
switch and install a lock on it before you clean or do
maintenance on the concentrate feeder.
2.3.6.3 Installation of Safety Decals
1. Make sure that the installation surface is clean and dry.
2. Make sure that the temperature of the mounting surface is not less
than 5 °C (41 °F).
3. Find the correct position for the decal before you remove the backing
paper.
4. Remove a small part of the cover paper.
5. Put the decal in the correct position on the installation surface and
carefully push the small part of exposed adhesive surface of the decal
onto the installation surface.
innovators in agriculture
To Next Page
Loading...
