LEMKEN Juwel 7 - Check before Departure; Correct Behaviour in Road Traffic

Safety measures and precautions
26
3.8.4 Check before departure
 Before driving with the implement raised, lock the control lever of the control
unit; otherwise it may drop and the implement may be unintentionally lowered.
 Mount and check the transport equipment such as the lighting system, warning
signs and protective devices.
The actuating cables for the quick-release couplings of the tractor must hang
loose and must not actuate themselves in any position.
 Before starting up and operating the implement, check the immediate vicinity
around it. No-one must be standing in this area!
 Ensure that visibility is adequate.
Observe permitted axle loads, total weights and transportation dimensions.
3.8.5 Correct behaviour in road traffic
 When driving on public highways, observe the relevant statutory national regu-
lations.
Driving behaviour, steering and braking performance are influenced by ballast
weights.
 Ensure that the tractor has adequate steering and braking performance.
 When driving around corners, take into account the wide radius and the inertia
of the device.
It is prohibited to transport people on the device.