Adjustments
46
10 ADJUSTMENTS
CAUTION
Read and follow the section entitled "Safety and protection
measures.
The implement may only be used, maintained and repaired by
people who are familiar with it and who are aware of the haz-
ards involved.
All adjustments and repair work, as well as the rectification of
any malfunctions, is to be conducted when the drive has been
switched off and the engine is at a standstill only. Remove the
ignition key.
DANGER
Risk of accidents while making adjustments
During all adjustment work, there is a risk of crushing, cutting,
jamming and impacts to the hands, feet and body on heavy and -
in part - spring-loaded and/or sharp-edge parts.
Adjustment work may be carried out by appropriately instructed
personnel only.
Always wear appropriate protective clothing.
Always observe the currently valid operational safety and acci-
dent prevention regulations.
To Next Page
Loading...
