LEMKEN Juwel 7 - Turnover Device; Optiquick Adjustment System; Base Frame; Land Wheel

Layout and description
32
5.2.2 Turnover device
The ploughs of the Juwel 7 series are equipped with the electro hydraulic turnover
device TurnControl G 100.
5.2.3 Optiquick adjustment system
The plough line and the front furrow width can be adjusted independently. This
permits ploughing without lateral force at every working width.
5.2.4 Base frame
The ploughs of the Juwel 7 series are equipped with a box section frame 120 x
120 x 10 mm.
The frame height is 80 cm.
5.2.5 Land wheel
The following land wheels are available for the ploughs of the Juwel 7 series:
 Depth control wheel 10.0/80-12, 710 x 264 mm (up to and including 4-furrow)
 Depth control wheel 10.0/75-15.3, 770 x 277 mm
 Hydraulically dampened depth and transport wheel 10.0/75-15.3, 770 x 277 mm
 Hydraulically dampened depth and transport wheel 340/55-16, 770 x 340 mm
 Hydraulically adjustable depth and transport wheel 340/55-16, 770 x 340 mm