Attaching and detaching
43
8.2 Detaching
Detach the plough from the tractor as fol-
lows:
The plough should be in the covering work-
ing position.
Always place the plough onto firm and
level ground.
Set the tractor hydraulics to position con-
trol.
Depressurise the hydraulic hoses. See
the operating manual provided by the
tractor manufacturer.
Remove the upper linkage from the
three-point linkage (7).
Disconnect the hydraulic hoses and
electric cables and slide on the protec-
tive caps.
Pull out the spring locking bolt (3) with a
turning movement.
Lower the stand (2).
Secure the stand with the spring locking
bolt (3).
CAUTION
Risk of injury due to falling stand.
7
2
3
To Next Page
Loading...
