LEMKEN Juwel 8 - Preparing the Implement

Preparing the implement
40
7 PREPARING THE IMPLEMENT
Before using the implement for the first time, set it up as described
below while you are still in the yard and familiarise yourself with
the implement and its functions.
The settings are adjusted with the implement mounted to the trac-
tor.
7.1 Removing the lighting equipment
7.1.1 General
The lighting equipment must be removed before the implement is used in the field,
as follows:
7.1.2 With uniwheel

On the tractor, remove the plug for the
lighting equipment.
 Roll up the cable (2) towards the rear.

Remove the linch pins (4) on the left and
right sides.
 Remove the lighting carriers (1).
3
1
2