Driving on public roads
49
10.4 Installing the lighting equipment
10.4.1 With uniwheel
Install the lighting carriers (1) on the last
leg as shown.
Insert the linch pins (2) on the left and
right sides.
Unroll the cable (3) towards the front.
Lay the cable (3) between the frame and
stalk plates as far as the headstock.
Connect the lighting equipment to the
tractor.
During field work, ensure that the lighting equipment and cable
are removed, otherwise they might be damaged.
Check that the lighting equipment is
working.
2
1
3
To Next Page