Driving on public roads
50
10.4.2 With depth control wheel
To prevent damage, the implement must always be raised before
the lighting equipment is installed or removed.
Install the lighting equipment (1) as
shown.
Insert the linch pin (2).
Unroll the cable (3) towards the front.
Lay the cable (3) between the frame and
stalk plates as far as the headstock.
Connect the lighting equipment to the
tractor.
During field work, ensure that the lighting equipment and cable
are removed, otherwise they might be damaged.
Check that the lighting equipment is
working.
1
3
3
1
2
To Next Page
Loading...
