LEMKEN Juwel 8 - Duramaxx Plough Body; Pitch Angle

Operation
61
11.8 DuraMaxx plough body
11.8.1 Pitch angle
Medium pitch angle
The bodies are mounted at a medium pitch
angle in relation to the ground. The eccen-
tric washer (1) is in the middle position.
To change the pitch angle:
 Loosen the nut (2).
Larger pitch angle

Adjust the eccentric washer (1).
 Larger pitch angle
 Move the eccentric washer (1) forwards
=> improved penetration.
Smaller pitch angle

Smaller pitch angle
 Move the eccentric washer (1) back-
wards => improved depth control.
 Tighten the nut (2), see «Tightening tor-
ques, page 101».
2
3
1
3
1
1