Adjustments
34
8 ADJUSTMENTS
• Read and adhere to the General Safety Instructions!
• The implement may only be operated, maintained and repaired
by such persons who have been made acquainted with it and
who have been advised about the dangers!
• Adjustment- and maintenance operations as well as
eliminations of malfunctions should principally be carried
through with engine stopped and parking brake applied.
Remove ignition key!
8.1 Front Furrow Width
8.1.1 Adjustment by means of a Turnbuckle
Adjust outer turnbuckle (1) to make the
front furrow width equal in width to the
other bodies.
Front furrow too narrow
=> lengthen outer turnbuckle (1)
Front furrow too wide
=> shorten outer turnbuckle (1)
1
To Next Page
Loading...
