Safety Instructions
7
1 SAFETY INSTRUCTIONS
General Safety Instructions
• Before using the machine, always check both it and the tractor for roadworthi-
ness and operational safety!
• As well as the notes in these instructions the operator is advised to comply with
the generally applicable safety at work regulations and those relating to use of
the public highway!
• When driving on public roads with a raised machine the lifting control lever
should be locked against unintentional lowering!
• The fitted warning and advisory plates give important information for safe op-
eration; adhering to these increases your own safety!
• When using public roads adhere to applicable traffic rules!
• The operator should familiarise him-/herself with all controls and their functions
before starting work. During work could be too late!
• The clothing of the operator should fit tight. Avoid wearing any loose clothing!
• To avoid danger of fire keep the implement clean!
• Before beginning to drive check surroundings area (children)!
• Sitting or standing on the implement during operation or during transport is not
permissible.
• Attach implements as advised and only to the stipulated positions!
• Special care should be taken when the implement is coupled to or uncoupled
from the tractor.
• When coupling or uncoupling the implement bring the supporting stands into
the corresponding position (standing safety)!
• Fit weights only to the fixing points provided for those purposes!
• Adhere to the maximum permissible axle loads, total weights and transport
width!
To Next Page
Loading...
