LEMKEN VariOpal - 11 Maintenance

Maintenance
61
11 MAINTENANCE
All lubrication points must be greased regularly with environmentally friendly
grease according to the following table. For a long operation break the piston rods
of the hydraulic rams must be greased with non-acid grease. The polished areas
of wearing parts and the pins as well as adjusting devices must be treated with
grease regularly.
all before and
10 50 10 after
working hours winter break
Bearing of turnover
device and pivot
points
x x
Adjustment centre
Trulign/Optiquick
x x
Turnbuckles
x
Swinging axle of depth
control- and depth and
transport wheels
x x
Bearings of depth con-
trol- and depth and
control wheels
x x
Bearing of overload
safety device
x x
Bearings of disc coul-
ters
x x