Stepforremovingaten2.5-inchhot-swapharddiskdrivebackplanewithtwoNVMedrive
connector
a.Carefullyliftthebackplaneoutofthechassisbypullingoutwardsandliftingitup.
Ten 2.5-inch hard disk drive backplane
(with two NVMe connectors)
Figure130.Removalofa10x2.5-inchhot-swapharddiskdrivebackplanewithtwoNVMeconnectors
b.DisconnectthecablesfromtheNVMeadapterandremovetheNVMeadapterfromthePCI
Expressslot2(low-profile).See“Removinganadapter”onpage176
.
Chapter5.Removingandreplacingcomponents211