Lenovo System x3550 M5 - Removing the Security Bezel

Step7.ConnecttheCOMportbracketcabletothesystemboard.
COM port cable connector
Figure186.COMportbracketcablerouting
Step8.Reinstallthecover(see“Replacingthecover”onpage120).
Step9.Slidetheserverintotherack.
Step10.Reconnectthepowercordsandanycablesthatyouremoved.
Step11.Turnontheperipheraldevicesandtheserver.
Removingthesecuritybezel
Usethisinformationtoremovethesecuritybezel.
Note:Installationofthesecuritybezelistolimitaccessforincreasedsecurity.
Toremovethesecuritybezel,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page116
.
Step2.Ifnecessary,turnofftheserverandperipheraldevicesanddisconnectthepowercordsandall
externalcables.
260LenovoSystemx3550M5InstallationandServiceGuide