Step4.AligntheflashdevicewiththeconnectoronthesystemboardandpushitintotheUSBconnector
untilitisfirmlyseated.
USB embedded
hypervisor
flash device
Figure148.USBhypervisorflashdeviceinstallation
Step5.Reconnectthepowercordsandanycablesthatyouremoved.
Step6.Reinstallthecover(see“Replacingthecover”onpage120).
Step7.Slidetheserverintotherack.
Step8.Turnontheperipheraldevicesandtheserver.
Removingthecoin-cellbattery
Usethisinformationtoremovethecoin-cellbattery.
Thefollowingnotesdescribeinformationthatyoumustconsiderwhenreplacingthecoin-cellbattery.
•Lenovohasdesignedthisproductwithyoursafetyinmind.Thelithiumbatterymustbehandledcorrectly
toavoidpossibledanger.Ifyoureplacethecoin-cellbattery,youmustadheretothefollowinginstructions.
Note:IntheU.S.,call1-800-IBM-4333forinformationaboutbatterydisposal.
•Ifyoureplacetheoriginallithiumbatterywithaheavy-metalbatteryorabatterywithheavy-metal
components,beawareofthefollowingenvironmentalconsideration.Batteriesandaccumulatorsthat
containheavymetalsmustnotbedisposedofwithnormaldomesticwaste.Theywillbetakenback
freeofchargebythemanufacturer,distributor,orrepresentative,toberecycledordisposedofina
propermanner.
•Toorderreplacementbatteries,call1-800-IBM-SERVwithintheUnitedStates,and1-800-465-7999or
1-800-465-6666withinCanada.OutsidetheU.S.andCanada,contactyourLenovosalesrepresentative
orLenovoreseller.
Note:Afteryoureplacethecoin-cellbattery,youmustreconfiguretheserverandresetthesystem
dateandtime.
Chapter5.Removingandreplacingcomponents229