Lenovo System x3550 M5 - Removing the Operator Information Panel Assembly

Four3.5-inchhot-swaporsimple-swapharddiskdriveserverconfiguration:
Media cage
Video connector
Screws
Figure170.Frontvideoconnectorassemblyinstallationforfour3.5-inchhot-swaporsimple-swaphard
diskdriveserverconfiguration
Step3.Carefullypushthemediacagebackintothechassis(see“Replacingthemediacage”onpage
237
).Remembertoreconnectthecablesthatwereremovedfromthesystemboard.
Step4.Reinstallthecover(see“Replacingthecover”onpage120).
Step5.Slidetheserverintotherack.
Step6.Reconnectthepowercordsandanycablesthatyouremoved.
Step7.Turnontheperipheraldevicesandtheserver.
Removingtheoperatorinformationpanelassembly
Usethisinformationtoremovetheoperatorinformationpanelassembly.
Toremovetheoperatorinformationpanelassembly,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page116
.
Step2.Turnofftheserverandperipheraldevicesanddisconnectallpowercords;then,removethe
cover(see“Removingthecover”onpage119
).
Step3.Fortheeight2.5-inchhot-swaporsimple-swapandten2.5-inchhot-swapharddiskdriveserver
configuration,removethemediacage(see“Removingthemediacage”onpage234).Forthefour
3.5-inchhot-swaporsimple-swapharddiskdriveserverconfiguration,disconnecttheoperator
248LenovoSystemx3550M5InstallationandServiceGuide