Lenovo System x3550 M5 - Starting the Setup Utility; Setup Utility Menu Choices

•Changeinterruptrequest(IRQ)settings
•Resolveconfigurationconflicts
StartingtheSetupUtility
UsethisinformationtostarttheSetupUtility.
TostarttheSetupUtility,completethefollowingsteps:
Step1.Turnontheserver.
Note:Approximately20secondsaftertheserverisconnectedtopower,thepower-controlbutton
becomesactive.
Step2.Whentheprompt<F1>Setupisdisplayed,pressF1.Ifyouhavesetanadministratorpassword,
youmusttypetheadministratorpasswordtoaccessthefullSetupUtilitymenu.Ifyoudonottype
theadministratorpassword,alimitedSetupUtilitymenuisavailable.
Step3.Selectsettingstovieworchange.
SetupUtilitymenuchoices
UsetheSetupUtilitymainmenutoviewandconfigureserverconfigurationdataandsettings.
ThefollowingchoicesareontheSetupUtilitymainmenufortheUEFI.Dependingontheversionofthe
firmware,somemenuchoicesmightdifferslightlyfromthesedescriptions.
•SystemInformation
Selectthischoicetoviewinformationabouttheserver.Whenyoumakechangesthroughotherchoices
intheSetupUtility,someofthosechangesarereflectedinthesysteminformation;youcannotchange
settingsdirectlyinthesysteminformation.ThischoiceisonthefullSetupUtilitymenuonly.
–SystemSummary
Selectthischoicetoviewconfigurationinformation,includingtheID,speed,andcachesizeofthe
microprocessors,machinetypeandmodeloftheserver,theserialnumber,thesystemUUID,andthe
amountofinstalledmemory.WhenyoumakeconfigurationchangesthroughotheroptionsintheSetup
Utility,thechangesarereflectedinthesystemsummary;youcannotchangesettingsdirectlyin
thesystemsummary.
–ProductData
Selectthischoicetoviewthesystem-boardidentifier,therevisionlevelorissuedateofthefirmware,
theintegratedmanagementmoduleanddiagnosticscode,andtheversionanddate.
ThischoiceisonthefullSetupUtilitymenuonly.
•SystemSettings
Selectthischoicetovieworchangetheservercomponentsettings.
–AdaptersandUEFIDrivers
SelectthischoicetoviewinformationabouttheUEFI1.10andUEFI2.0compliantadaptersand
driversinstalledintheserver.
–Processors
Selectthischoicetovieworchangetheprocessorsettings.
–Memory
Selectthischoicetovieworchangethememorysettings.
Chapter2.Configuring37