ReplacingaPCIriser-cardassembly
UsethisinformationtoreplaceaPCIriser-cardassembly.
ToreplacethePCIriser-cardassembly,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginsonpage“Safety”onpagevand“Installationguidelines”
onpage30.
Step2.Makesurethattheserverandallperipheraldevicesareturnedoffandthatthepowercordsandall
externalcablesaredisconnected.
Step3.Reinstallanyadaptersandreconnectanyinternalcablesthatyouremovedinotherprocedures.
Step4.AlignthePCIriser-cardassemblywiththePCIriserconnectoronthesystemboardandguide
pinsontheserver;then,pressdownonbluetouchpointsonthePCIriser-cardassemblyto
installtheassemblyintheserver.MakesurethatthePCIriser-cardassemblyisfullyseated
inthePCIconnectorsonthesystemboard.
Figure127.PCIriser-cardassembly1installation
Chapter6.Removingandreplacingcomponents199