Lenovo x3650 M4 BD 5466 - Completing the Installation

Figure64.USBembeddedhypervisorflashdeviceinstallation
Step8.AligntheUSBflashdevicewiththeconnectoronthesystemboardandpushitintotheconnector
untilitisfirmlyseated.
Step9.Slidethelockbartowardtheriser-cardassemblytothelockedpositionuntilitisseatedfirmly.
Ifyouhaveotherdevicestoinstallorremove,dosonow.Otherwise,goto“Completingtheinstallation”
onpage73.
Note:YoumustconfiguretheservertobootfromthehypervisorUSBdrive.See“Configuringtheserver”
onpage84
forinformationaboutenablingtheembeddedhypervisor.
Completingtheinstallation
Usethisinformationtocompletetheinstallation.
Tocompletetheinstallation,completethefollowingsteps:
Step1.Ifyouremovedtheairbaffle,reinstallit(see“Installingtheairbaffle”onpage74).
Step2.IfyouremovedaPCIeriser-cardassembly,reinstallit(see“InstallingaPCIriser-cardassembly”on
page75).
Step3.Ifyouhavetheoptionalhot-swaprearharddiskdrivecageinstalled,rotateitdown(see“Rotating
thehot-swaprearharddiskdrivecagedown”onpage77
.
Step4.Ifyouremovedtheservertopcover,replaceit(see“Installingtheservertopcover”onpage80).
Step5.Installtheserverintherackcabinet(seetheRackInstallationInstructionsthatcomewiththe
serverforinstructions).
Step6.Toattachperipheraldevicesandconnectthepowercords,see“Frontview”onpage14).
Chapter2.Installingoptionaldevices73