Lenovo x3650 M4 BD 5466 - Replacing a Usb Embedded Hypervisor Flash Device

Figure118.USBembeddedhypervisorflashdeviceremoval
Step8.Ifyouareinstructedtoreturnthehypervisormemorykey,followallpackaginginstructions,anduse
anypackagingmaterialsforshippingthataresuppliedtoyou.
Note:YoumustconfiguretheservernottolookforthehypervisorUSBdrive.See“Configuringthe
server”onpage84
forinformationaboutdisablinghypervisorsupport.
ReplacingaUSBembeddedhypervisorflashdevice
UsethisinformationtoreplaceaUSBembeddedhypervisorflashdevice.
ToinstallaUSBhypervisormemorykeyintheserver,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginsonpage“Safety”onpagevand“Installationguidelines”
onpage30.
Step2.Turnofftheserver(see“Turningofftheserver”onpage19)andallattachedperipheraldevices.
Disconnectallpowercords;then,disconnectallexternalcablesasnecessarytoreplacethedevice.
Step3.Removetheservertopcover(see“Removingtheservertopcover”onpage247).
Step4.Rotatethehot-swaprearharddiskdrivecageup(see“Rotatingthehot-swaprearharddisk
drivecageup”onpage155.
Step5.RemovePCIriser-cardassembly1(see“RemovingaPCIriser-cardassembly”onpage197).
Step6.LocatetheUSBembeddedhypervisorflashdeviceconnectoronthesystemboard.
190LenovoSystemx3650M4BDInstallationandServiceGuide