Lenovo x3650 M4 BD 5466 - Memory Module Installation

Figure44.Faninstallation
1.Pullupthebluehandleonthefancage.
2.Orientthefansothatthefancablepointstothesystemboard.
3.Lowerthefanintothefanslotintheserverandensurethatisitseatedcorrectly.
4.Connectthefancabletotheconnectoronthesystemboard.(See“System-boardinternal
connectors”onpage23).
Note:Makesurethecablepassesthroughthecableclips.
5.Insertthefancableintothecableretainerclip.
6.Returnthebluehandlebacktoitshorizontalposition.
Step9.Ifyouhaveotherdevicestoinstallorremove,dosonow.Otherwise,goto“Completingthe
installation”onpage73
.
Step10.InstallingFan2Aor3A:
1.Orientthefansothatthefancablepointstothesystemboard.
2.Lowerthefanintothefanslotintheserverandensurethatisitseatedcorrectly.
3.Connectthefancabletotheconnectoronthesystemboard.(See“System-boardinternal
connectors”onpage23).
4.Insertthefancableintothecableretainerclip.
Note:Makesurethecablepassesthroughthecableclips.
Step11.Ifyouhaveotherdevicestoinstallorremove,dosonow.Otherwise,goto“Completingthe
installation”onpage73
.
Memorymoduleinstallation
Thefollowingnotesdescribethetypesofdualinlinememorymodules(DIMMs)thattheserversupports
andotherinformationthatyoumustconsiderwhenyouinstallDIMMs.
•ConfirmthattheserversupportstheDIMMthatyouareinstalling,seehttp://www.lenovo.com/us/en/
serverproven/.
Chapter2.Installingoptionaldevices55