Lenovo x3650 M4 BD 5466 - Removing a Usb Embedded Hypervisor Flash Device

Figure116.Cablerouting
Attention:
•Makesuretherelevantcablespassthroughthecableclips.
•Makesurethatthecableisnotpinchedanddoesnotcoveranyconnectorsorobstructany
componentsonthesystemboard.
Step5.Installtheservertopcover(see“Replacingtheservertopcover”onpage248).
Step6.Reconnecttheexternalcables;then,reconnectthepowercordsandturnontheperipheraldevices
andtheserver.
RemovingaUSBembeddedhypervisorflashdevice
UsethisinformationtoremoveaUSBembeddedhypervisorflashdevice.
ToremoveaUSBhypervisorkeyfromtheserver,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginsonpage“Safety”onpagevand“Installationguidelines”
onpage30.
Step2.Turnofftheserver(see“Turningofftheserver”onpage19)andallattachedperipheraldevices.
Disconnectallpowercords;then,disconnectallexternalcablesasnecessarytoreplacethedevice.
Step3.Removetheservertopcover(see“Removingtheservertopcover”onpage247).
Step4.Rotatethehot-swaprearharddiskdrivecageup(see“Rotatingthehot-swaprearharddisk
drivecageup”onpage155.
188LenovoSystemx3650M4BDInstallationandServiceGuide