Lenovo x3650 M4 BD 5466 - Page 66

Figure39.Type1-SATA
•Type-SAS
Note:Thisbackplanecanbeanindependentconfiguration(Cascadingwiththefrontbackplaneis
unnecessary)
Figure40.Type2-SAS
Toinstallthehot-swapbackplanefortherearharddiskdrivecage,completethefollowingsteps.
Step1.Readthesafetyinformationthatbeginsonpage“Safety”onpagevand“Installationguidelines”
onpage30.
Step2.Turnofftheserver(see“Turningofftheserver”onpage19)andallattachedperipheraldevices.
Disconnectallpowercords;then,disconnectallexternalcablesfromtheserver.
Step3.Removetheservertopcover(see“Removingtheservertopcover”onpage32).
Step4.Connectcablestothebackplane.
•Type1-SATA
–ConnecttheLEDsignal,SATAsignalandpowercablestothebackplane.
52LenovoSystemx3650M4BDInstallationandServiceGuide