Lenze i700

9 Diagnostics & error management
9.3 History buffer
285
Lenze · i700 servo inverter · reference manual · DMS 3.0 EN · 06/2016 · TD06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Subindex 3: Latest acknowledged message
Subindex of the most recent message acknowledged by the EtherCAT master.
Setting range (min. value | unit | max. value) Lenze setting
0 255 0
 Write access  CINH  OSC  P  RX  TX UNSIGNED_8
Subindex 4: New active message
TRUE if messages are pending that have not been acknowledged by the EtherCAT master yet.
Display area (min. value | unit | max. value) Initialisation
0 255 0
 Write access  CINH  OSC  P  RX  TX UNSIGNED_8
Subindex 5: Control bits
Settings for the transmission and storage of the messages
Setting range (min. value | unit | max. value) Lenze setting
0 65535 0
 Write access  CINH  OSC  P  RX  TX UNSIGNED_16