EasyManua.ls Logo

Lexmark C920 - Page 77

Lexmark C920
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diagnostic information 2-35
5056-XXX
Ready The printer is ready to receive and
process print jobs.
Send a job to print.
Remote Management Active
DO NOT POWER OFF
The printer settings are being
configured, and the printer was taken
offline to ensure it is not currently
printing and processing jobs.
Wait for the message to clear.
Remove all color supplies The printer has been set to Black
Only mode.
Remove all color cartridges and
color PC Units.
Select Continue to clear the
message and print in Black Only
mode.
Cancel the current job.
Remove paper from bin <x> Remove the stack of paper from the
specified bin(s).
Remove paper from all bins Remove the paper from all output
bins.
Remove paper from standard
output bin
Remove the paper from the standard
bin.
Replace All Photo Dev All photo developers are nearing
the end of life, and need replacing.
-Select Continue to clear the
message and print without replacing
the photodevelopers.
-Replace the cyan, magenta, yellow,
and black photodevelopers.
Replace <Color> Photo Dev The specified color
photodeveloper is nearing the end
of life and needs replacing.
-Select Continue to clear the
message and print without replacing
the specified photodeveloper.
-Replace the specified
photodeveloper.
Replace All Color Photo Dev All color photodevelopers are
nearing the end of life and need
replacing.
-Select Continue to clear the
message and print without replacing
the photodevelopers.
-Replace the cyan, magenta, and
yellow photodevelopers.
Replace Black and
Oil Coating Roll
The black photodeveloper and oil
coating roller are nearing the end
of life and need replacing.
-Select Continue to clear the
message and print without installing
a new toner cartridge and oil coating
roll.
-Replace the toner cartridge and oil
coating roll.
Replace oil coating roll The oil coating roll is nearing the
end of life and needs replacing.
-Select Continue to clear the
message and print without installing
a new oil coating roll.
-Replace the oil coating roll.
Message Meaning Action

Table of Contents

Other manuals for Lexmark C920

Related product manuals