2-40 Service Manual
5056-XXX
56 Parallel port <x> disabled Data has been sent to the printer
through a disabled parallel port.
-Select Continue to clear the
message.
The printer discards any data
received through the parallel port.
-Make sure the Parallel Buffer menu
item is not set to Disabled.
56 Std parallel port disabled
56 Serial port <x> disabled Data has been sent to the printer
through a disabled serial port.
-Select Continue to clear the
message.
The printer discards any data
received through the serial port.
-Make sure the Serial Buffer menu
item is not set to Disabled.
56 USB port <x> disabled Data has been sent to the printer
through a disabled USB port.
-Select Continue to clear the
message.
The printer discards any data
received through the USB port.
-Make sure the USB Buffer menu
item is not set to Disabled.
57 Configuration change, some
Held Jobs were lost
Select Continue to clear the
message.
58 Input config error One of the input trays failed, and the
large capacity feeder is now
configured incorrectly. The large
capacity feeder must be installed as
Tray 3 or Tray 5.
1. Turn off and unplug the printer.
2. Replace or remove the failed
input tray.
3. Plug in the printer, and turn it on.
58 Too many disks installed Self explanatory. 1. Turn off and unplug the printer.
2. Remove the excess hard disks.
3. Plug in the printer, and turn it on.
58 Too many flash options
installed
Self explanatory. 1. Turn off and unplug the printer.
2. Remove the excess flash
memory.
3. Plug in the printer, and turn it on.
58 Too many bins attached Self explanatory. 1. Turn off and unplug the printer.
2. Remove the additional bins.
3. Plug in the printer, and turn it on.
61 Defective disk Self explanatory. -Select Continue to clear the
message and continue printing.
-Install a different hard disk before
you perform any operations that
require a hard disk.
62 Disk full Self explanatory. -Select Continue to clear the
message and continue processing.
Any information not previously stored
on the hard disk is deleted.
-Delete fonts, macros, and other data
stored on the hard disk.
-Install a larger hard disk.
Message Meaning Action
To Next Page
Loading...
