USING THE PROGRAM
Setting information of each device
The setting information of each device is as follows.
ODU, ERV, ERV DX
Item Description
Device Type
Select a device type.
y ODU(Outdoor unit), ERV(Energy Recovery Ventilator),
ERV DX(Direct Expansion Energy Recovery Ventilator)
Unit Name
(20 Characters)
Enter the device name.
y Up to 20 characters.
Address
(00-FF)
Type the central control address of the device.
y A central control address value is a number between 00 and FF. You can
use only 1 device per address.
Model
(20 Characters)
Type the device model.
y Up to 20 characters.
Capacity
Type the maximum capacity in thousand BTUs for devices.
y Up to 5 characters.
y The capacity of the actual device cannot exceed the input value.
Add at once
y It is used when you need to add several devices of the same type.
y Select check box, input the desired number of devices, and the devices
are added at once, and the device name and address are automatically
increased.
(During the Add all, if duplicate address value occurs, the information
notice message for the duplicate address is displayed.)
To Next Page
Loading...
Need help?
General
