USING THE PROGRAM
Configuring Time-Limit Operation
1. In the main menu, click(touch) the [AutoLogic > TimeLimitControl] menu icon.
2. In the group configuration status area, click(touch) a group to be controlled.
• The device list, status information, and condition details of the group are displayed.
3. Select the control status in the conditions configuration area.
Item Description
Oper
Choosing whether to run Time-Limit Operation
y [Run] Button: Run the time-limit operation.
y [Stop] Button: Stops the time-limit operation.
Hours to Off(Hour)
y Select the operation time limit of an operation group.
y The devices included in the group operate for the selected time
then stop automatically.
Days Select which day(s) of the week to run the time-limit operation.
To Next Page
Loading...
Need help?
General
