USING THE PROGRAM
Advance Setting
The following explains how to configure the functions necessary for device operation.
Item Description
LGAP setting
(AC Smart IV Only)
y Master: ACS IV Controller is used independently.
y Slave: It shares the communication line with other ACS IV Controller
products.
(If multiple ACS IV Controllers are used, one must be selected as Master
and the others as Slave. In slave mode, some functions of Auto Search in
the Installing menu are not available.)
Peak/Demand set
y Peak Control: You can use the peak control feature in the auto logic
menu.
y Demand Control: You can use the demand control feature in the auto
logic menu.
Set the operation
mode
y Priority Control: In Peak/Demand Control menu, control the
devices based on the priority of the group.
y Outdoor Unit Capacity Control: In the Peak/Demand Control
menu, control the outdoor capacity rate per unit.
Temperature
difference
for Setback/
AutoChangeOver
[+]/[-] button to select the temperature gap.
Update S/W
y Software upgrade using a USB memory stick.
y Complete upgrade and restart the system.
DB backup Backup the DB onto a USB memory stick.
To Next Page
Loading...
Need help?
General
