USING THE PROGRAM
• AWHP and Hydrokit Fine Control
In AWHP control menu, touch [Detail. ▶] button, and in the displayed detail control window,
you can control detail items. The composition and functions of the detail menu are as follows.
Item Description
Operation
y [ON] Button: Starts the operation of the device.
y [OFF] Button: Stops the operation of the device.
Hotwater
y [ON] Button: Enables the hot water function.
y [OFF] Button: Disables the hot water function.
Partial Lock
y [Set] Button: Disables remote control for all features.
y [Clear] Button: Disable the lock.
Mode
y [AUTO] Button: Evaluates the operating environment conditions
and automatically sets the optimum temperature.
y [COOL] Button: Operates with Cooling Mode.
y [HEAT] Button: Operates with Heating Mode.
Air Temp./
Water Temp.
(Indicated as air or water temperature depending on the product.)
Click(Touch) [▲]/[▼] to set the air/water temperature.
Hot Water Temp. Click(Touch) [▲]/[▼] to set the water heater temperature.
To Next Page
Loading...
Need help?
General
