USING THE PROGRAM
- New easy control registration
In easy control, if you touch [New] button, you can register new easy control. The composi
-
tion and functions of the detail setting menu of easy control are as follows.
Item Description
User mode name Click(Touch) the input section, and input easy control name.
Operation
y [ON] Button: Starts the operation of the device.
y [OFF] Button: Stops the operation of the device.
Set Click(Touch) [▲]/[▼] to set the temperature.
Mode
y [COOL] Button: Operates with Cooling Mode.
y [HEAT] Button: Operates with Heating Mode.
y [FAN] Button: Purifies the air.
y [DRY] Button: Dehumidifies the air during the rainy season or
when humidity is high.
y [Drift] Button: Reduces energy consumption by operating in the
most efficient method possible.
AutoVent
y [Set] Button: If the CO₂ concentration level increases during
cooling or heating, increase the outdoor air volume to reduce the
CO₂ concentration level.
y [Clear] Button: Disables AutoVent.
CO
2
(ppm)
Use [▲]/[▼] to set the desired carbon dioxide emission level from
500 ppm to 1,500 ppm in intervals of 100 ppm (CO₂ is not settable
in some models.).
Humidify
y [Set] Button: Enables the humidifier function.
y [Clear] Button: Disables the humidifier function.
To Next Page
Loading...
Need help?
General
