USING THE PROGRAM
• ERV Fine Control
In the control menu of the ventilation, touch [Detail. ▶] button, and in the displayed detail
control window, you can control detail items. The composition and functions of the detail menu
are as follows.
Item Description
Operation
y [ON] Button: Starts the operation of the device.
y [OFF] Button: Stops the operation of the device.
Set
Click(Touch) [▲]/[▼] to set a desired temperature (the ERV is not
activated).
Mode
y [AUTO] Button: Evaluates the operating environment conditions and
automatically sets the optimum temperature.
y [HEX] Button: Air supply and exhaust are all ventilated through the
heat exchanger.
y [NORMAL] Button: Exhaust AIR does not pass through the heat
exchanger.
Fan Speed
y [LOW] Button: Slow fan speed.
y [HIGH] Button: Fast fan speed.
y [SUPER] Button: Maximum fan speed.
y [AUTO] Button: Loops from low to high to super fan speeds.
Partial Lock
y [Set] Button: Disables remote control for all features.
y [Clear] Button: Disable the lock.
To Next Page
Loading...
Need help?
General
