USING THE PROGRAM
Air-cooled scroll chiller, water-cooled scroll chiller
Air-cooled and water-cooled is separated according to the refrigerant (cooling in air: air, liquid-
cooled: water). Functions and menus are the same, but there is a difference in the range and set 
temperature, etc.
The following menu controls the configuration and function of the air-cooled scroll chiller, water-
cooled scroll chiller.
Item Description
Operation
 y [ON] Button: Starts the operation of the device.
 y [OFF] Button: Stops the operation of the device.
GoTo
 y [Schedule ▶] Button: Move to Schedule menu.
 y [View Details ▶] button: Moves to detail information screen.
Mode
 y [COOL] Button: Operates with Cooling Mode.
 y [HEAT] Button: Operates with Heating Mode.
Mode Target 
Temp (℃)
Click(Touch) [▲]/[▼] to set the mode set temperature.
 y Air-cooled scroll chiller
 - COOL: 5 ℃~15 ℃
 - HEAT: 35 ℃~55 ℃
 y water-cooled scroll chiller
 - COOL: 5 ℃~15 ℃
 - HEAT: 40 ℃~57 ℃
Demand limit
 As measured at 1minute intervals the power consumption of the refrigerator, 
the current power consumption does not exceed a target power consumption, 
demand rate limit, function to lower the operation rate of the current. 
Click(Touch) the [▲] / [▼] button to set a limit on the rate of demand.
 y air-cooled scroll chiller: 0~120 (10 units)
 y water-cooled scroll chiller: 0, 30~120 (10 units)
[Apply] Button Apply control menu setting to the device.
[Detail. ▶] Button
Controls details.