USING THE PROGRAM
TMS Setting
The following explains how to configure the remote monitoring and control system.
Item Description
TMS configuration Select whether to use a remote control service.
TMS server address Configure the remote control service server address.
TMS server port Configure the remote control service port.
Update Cycle (seconds)
Configures the remote control service update cycle
(in seconds).
Site address Enter an address for the remote site.
Site name Enter the site name.
Site code Click(Touch) the [Request Site Code] button to enter the site code.
Admin Name Enter the name of the site manager.
Admin Contact Enter the site manager's phone number.
NOTES
TMS is not available in the US market at this time.
To Next Page
Loading...
Need help?
General
