Liebert Vertiv GXT5 User Manual

Vertiv | Liebert® GXT5™ | Installer/User Guide 95
c. Enter the Username and Password, then click Login.
The factory-defaults:
Username : Liebert (case-sensitive)
Password: Liebert (case-sensitive)
• The name and password may have been changed from the default. Be sure to obtain the user name
and password from an administrator.
The status of the transfer displays in the File Transfer Status section.
• The transfer process takes about 2 minutes. Do not leave or close the page until the status is “Update
Complete.”
d. You can check the rmware version, select the System folder in the tab-menu pane on the left-hand side
of the page, and check the Firmware Version eld, see Figure 5-8.
Figure 5-7 File Transfer on the RDU101 User Interface

Liebert Vertiv GXT5 Specifications

General

Output Voltage	230V
Topology	Double Conversion Online
Frequency	50/60 Hz
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Form Factor	Rack/Tower
Battery Type	Valve Regulated Lead Acid (VRLA)
Communication Ports	USB, RS-232
Efficiency	Up to 95%
Typical Recharge Time	3 hours to 90%
Storage Temperature	-15°C to 40°C
Humidity	0% to 95% non-condensing