Vertiv | Liebert® GXT5™ | Installer/User Guide 43
• 8-kVA and lower models do not support paralleling at this time.
• You must use Vertiv parallel cables for the connection.
• If a fault occurs during parallel-system operation, shut-o the system and make sure the cables are-
connected correctly, see Figure 2-14.
CAUTION!Risk of improper disconnection
Can cause equipment damage. Do not disconnect parallel-system cables while the system is
operating. Figure 2-14 Connection of 2 + 1 Parallel System
ITEM DESCRIPTION
1 Upper connector
2 Lower connector